This is an assortment of user tools for sale. Some of them will have a button to click to see a Picture. ... Instead of having to load each image to continue, just scroll this list and click to see an image. This is a list of tools for sale, which for various reasons are good deals.

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Back To Tool Index Back to Homepage

1. STANLEY NO. 40 SCRUB PLANE, T trademark on the cutter with good length. The japanning is worn. Someone replaced the handle and knob that aren't Stanley but they fit, Good .......... Sold $50.00
   Picture
   Picture - Sole

2. STANLEY NO. 220 BLOCK PLANE, It has an adjustable cutter. An early one with the V trademark on the cutter with good length. Looks like it has been repainted. Has the 10-12-(18)97 patent date on the cap. Some roughness on the sole, G+ .......... $30.00
   Picture
   Picture - Sole

3. STANLEY NO. 18, BLOCK PLANE, An earlier one from the 1890s. Large J half-circle trademark on the cutter. with good length. Early knuckle-joint lever cap. Adjustable throat is very nice. Some light pitting on the sole. A great user, G ........... Sold $30.00
   Picture
   Picture - Sole

4. STANLEY NO. 220 BLOCK PLANE, 6 inches long. Notched-rectangle logo on the cutter. Adjustable cutter. A later US production with almost all of the maroon enamel, G++ .......... Sold $25.00
   Picture
   Picture - Sole

5. STANLEY NO. G12-060 BLOCK PLANE, A late No. 60 made in England. Adjustable throat and cutter. Has had little use, G++ .......... Sold $20.00
   Picture
   Picture - Sole

6. STANLEY NO. 80 SCRAPER PLANE. An earlier with a curved front and back of the sole. Has a cutter is marked in some illegible foreign language. The japanning is worn on the handles, but they have some dark patina. Has some owner's initials, G ........ Sold $35.00
   Picture

7. STANLEY NO. 7C, JOINTER PLANE, 22 inches long. Sweetheart logo on the cutter, which has some pitting at the top but is good at the edge. The tip of the handle is missing and it needs some cleaning, but it will be a good user, G .......... Sold $50.00
   Picture
   Picture - Sole

8. STANLEY GAGE NO. 5C JACK PLANE, Complete. Missing most of the japanning. Decent wood, G ...... Sold $40.00
   Picture
   Picture - Sole

9. CRAFTSMAN (SEARS)) NO. 78 RABBET & FILLETSTER PLANE. Made by Millers Falls. Later one with the cutter adjusting lever. Good cutter. Complete with spur, fence and depth stop. 90% japanning. Has some rust that can use some cleaning, G+ .......... Sold $40.00
   Picture
   Picture - sole

10. MILLERS FALLS NO. 65 BLOCK PLANE. (Stanley No. 103) 80% japanning with a bit of dirt, This short one has the cutter-adjustment lever, G+ .......... $20.00
    Picture

11. SARGENT NO. 306, BLOCK PLANE, 6 inches long - like a Stanley No. 9 1/2 but with nickel plated trimmings. Has a Craftsman blade,(which is missing the little lateral-adjust lever) so, it was probably sold by Sears. 95% japanning, pretty good nickel plating, G++ .......... Sold $20.00
    Picture

1. MILLERS FALLS NO. 3 HAND DRILL. This is an uncommon drill. Three-jawed chuck 0 to 3/16 round shank bits. Tropical hardwood handle and knobs are nice with wear to the finish. The handle twists off (it's a little wobbly) to hold bits, which are missing. You can use regular twist drills. The knob on the crank doesn't turn. 11 1/2-inches overall, G ...... $25.00
   Picture
   Picture - Other Side

2. STANLEY NO. 1, TRY and MITER SQUARE, 6-inch. Iron handle. Sweetheart logo on the graduated blade, G ........ $25.00
   Picture

3. STANLEY NO. 85 1/2 PANEL GAUGE, Rosewood. 22 inches long. There is a thin shim on the right side of the head to take up some wear, and the shoe on the top has been replaced. But it is completely functional. Used for laying out larger boards, G+ ............ $35.00
   Picture
   Picture - Other Side

4. UNION TOOL CO. Protractor head and center-finder on a 12-inch No. 4 rule, graduated 1/8, 1/16, 1/32, and 1/64 scales, G+ ......... $45.00
   Picture

5. JEWELER'S HAMMER, The head is 2 1/4- inches long. The handle has been filed to a smaller diameter, G+ .......... $20.00
   Picture

6. STANLEY NO. 10 TRY SQUARE. A heavy-duty iron-framed machinist square. Six-inch blade not graduated. There is a long flake off top of the left side of the rosewood handle (in the picture) it is just on the surface and below the iron side, G ................ $25.00
   Picture

7. BEVEL, Rosewood and brass, 10-inch. Unmarked but probably made in England, G+ ............ $20.00
   See Picture

8. BEVEL SQUARE, English. Nine-inch blade. Rosewood and brass, G+ ............ $15.00
   See Picture

9. DISSTON & MORSS BEVEL SQUARE, Ten-inch. Has the decorative thumbscrew with the tit on top that fits the Fisher patent bevel. Pitting on the blade, G ................ $15.00
   Picture
   Picture - Thumbscrew

10. MEASURING LOT NO. 1. Four-inch try square - graduated, Stanley No 18 - six inch bevel square, and a Stanley No. 136 1/2 caliper rule, G+ ........ $55.00
    Picture

11. MEASURING LOT NO. 5. Stanley scratch awl, Twix offset bevel (about 5-inch blade), inside caliper, Lakeside center-finding punch, G+ ........ $40.00
    Picture

12. MEASURING LOT NO. 4. Outside caliper marked Pat. Apr. 15, 1915, inside caliper - Athol Mach.Co, Dividers - Union Tool Co, D. B. & S.2-inch square, with some pitting on the blade, G to G+ ........ Sold $50.00
    Picture

13. MEASURING LOT NO. 3. Stanley 47-061 marking gauge, Stanley No. 20 6-inch try-square ( looks WW II, unused w/ cosmoline, but some wear to the finish on the handle), Stanley scratch awl, and Craftsman stair gauges for a framing square, and a Hold-E-Zee screw-holding screwdriver, G+ to Fine ........ $50.00
    Picture

14. WORTH BRACE. 10 - inch sweep, A heavy-duty brace with alligator jaws. Nice rosewood handle and pad. Almost all of the nickle plating remains with a bit of light patina. A great user, G++ ........... $40.00
    Picture

15. DOUBLE SPOKE SHAVE, Has both a flat and convex shave side-by-side. The top of the cutters have some pitting, and I can't quite read logo. The sole and the bottom edges of the cutters are very nice for use, G ................ Sold $20.00
    Picture
    Picture - Bottom

16. STANLEY NO. 921-8 IN BRACE, Eight-inch sweep. A top-of-the-line brace with enclosed chuck and the ball-bearing stuff. Rosewood handle and pad. Completely functional, but has some patina from age and use, G .............. $35.00
    Picture

17. STANLEY NO. 44, CIRCULAR GUIDE for use with NOs. 20-25-30 and 40 ROUTER SHAPERS. I don't do power tools, but I got this. I don't know if it is an accessory or replacement part. Maybe someone is dying for one.... New in the box ................ $15.00
    Picture

18. MILLERS FALLS NO. 104, HAND DRILL, Three-jaw chuck holds any round bits from 0 to 3/16. Stained hardwood handle is hollow to hold bits, but they are missing. 11 1/2-inches overall length, G+ ............... Sold $25.00
    Picture
    Picture - Back

19. BROAD AXE HEAD.Only mark is J20. The edge is 12-inches wide. Has some rust, G ....... Sold $45.00
    Picture
    Picture - Back

20. E. C. STEARNS SAW VISE. Wentworth pattern with 10 1/2-inch jaws. Cam action adjustment. Made to screw on the side of a bench, or on a board to put in your vise. Has some light rust and a bit of dirt, G+ ......... Sold $25.00
    Picture

21. CRAFTSMAN BACK SAW, 16-inches. 12 ppi. Has owner's name and 1970 date etched along the top. Some green paint on the handle. Straight and sharp, G+ .......... Sold $30.00
    Picture

22. GREENLEE 3-INCH SLICK. Actually, a very nice slick with a broken handle. The blade is 9 3/4- inches. There are a couple of very tiny nicks on the edge. I have other slicks on my Edge Tools List , G++ ....... Sold $70.00
    Picture
    Picture

23. "YANKEE" NO. 45, PUSH DRILL, Has all eight bits from 1/16 to 11/64,which are in nice condition but may need a touch-up sharpening. - the 1/16 is a little short, G ......... $25.00
    Picture

24. NORTH BROS. "YANKEE" NO. 41, PUSH DRILL, Has all eight bits from 1/16 to 11/64ths, which are in nice condition but may need a touch-up sharpening. Some of the nickel plating is worn or missing, G+ ......... Sold $25.00
    Picture

25. TORPEDO LEVEL. Nine-inch. Rosewood and brass, probably English. The plumb vial has been replaced and not accurate, G ........... $15.00
    See Picture

26. STANLEY NO. 63 SPOKE SHAVE. Light-duty one with curved sole. Sweetheart logo on the 1 3/4 inch cutter with good length. 50% japanning with some patina on the bare-metal surfaces, G .............. Sold $25.00
    Picture
    Picture - Sole

27. C.E. JENNINGS 1/4-INCH SOCKET FIRMER CHISEL, 5-inch blade, 11 1/4-inches overall. Replaced handle, G ....... Sold $15.00
    Picture

28. UNION HARDWARE CO. 1 in. SOCKET FIRMER CHISEL, 6-inch blade, 12 3/4-inches overall. Chip on edge. Replaced handle, G ....... Sold $20.00
    Picture

29. ROBERT SORBY, 2 in. TANGED FIRMER CHISEL, 4 1/2-inch blade, 12-inches overall. Split in the ferrule and missing some of the cushion, G+ ....... Sold $25.00
    Picture

30. CRAFTSMAN NO. 2 HAND DRILL. Made by Millers Falls. This one's the large size, 14 1/2 inches long. A strong, serviceable tool built on a sturdy cast frame. Three-jawed chuck with protected spring holds 0 to 3/8 round shank bits. Spindle equipped with ball thrust bearings. Tropical hardwood handle and knobs are nice with wear to the finish. The handle unscrews to hold bits, there are five remaining. You can use regular twist drills. It could use a bit of cleaning, G+ ...... Sold $40.00
    Picture
    Picture - Back

31. HOOK SCRAPER CO. NO. 75 SCRAPER. Wood body with three extra blades, Fine ........... Sold $20.00
    Picture

32. STANLEY NO. 73 MORTISE GAUGE, Boxwood and brass. A little shorter than the other numbers at 6 inches long. Graduations to three inches for the slide. The adjustable mortise point has been filed down, so it's now a marking gauge, G+............ $25.00
    Picture

33. CRAFTSMAN Spiral Ratchet Screwdriver. Made by MILLERS FALLS. It spirals to drive a screw, and is reversible. The largest size, like the Stanley 31, 14 1/2 inches long closed. It has a 1/4 inch bit,and a No. 3 philips bit. They are Yankee, but interchangeable, G+ .......... Sold $20.00
    Picture

Back to Homepage Back To Tool Index