This is an index of edge tools for sale. Some of them will have a button to click to see a Picture. ... Instead of having to load each image to continue, just scroll this list and click to see an image. This list has axes and hatchets, drawknives, chisels, adzes, slicks and carving tools.

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Back To Tool Index Back to Home page

Blade Sharpening [Click To Order]

1. STANLEY NO. 200 SHARPENING JIG. For chisels and plane irons. It adjusts to the bevel degree you want. Has the 12-10-(19)12 patent date cast in the body, Fine ........... $95.00
   Picture

1. PLUMB SHINGLING HATCHET, New-old-stock from ca. 1950. Some minor patina, Fine ........... Sold $35.00
   Picture
2. VAUGHAN SHINGLING HATCHET, Has had little use, Fine ........... $25.00

   Picture
   

3. TRUE TEMPER HALF HATCHET,Flint Edge, U.S.A. In very nice condition but with a chip in the handle by the head, G+++ ........... $30.00
   Picture

4. TRUE TEMPER TOMMY AXE, 15 inches overall length. Hatchet with a nail-pulling claw. Chip off of the end of the handle and a few small chips on the blade, G+ ........... Sold $40.00
   Picture

1. C. E. JENNINGS PATTERNMAKER'S DRAW KNIFE, 4 inch. Has the black egg-shaped handles that have a couple of scuffs to the finish. Has had some use, but still a great user. Needs some sharpening and lapping, G+ ........... Sold $55.00
   Picture
   Picture - Back

2. THE JAMES SWAN CO. DRAW KNIFE, 6 inch. Minor dings on the maple? handles. Nice small size for use. No pitting, G++ .......... Sold $65.00
   Picture

3. GREENLEE DRAW KNIFE, 8 inch. With folding handles. Has some minor rust and patina, G+ .................... $60.00
   Picture

4. NEW HAVEN EDGE TOOL WORKS DRAW KNIFE, 8 inch, Laminated blade. Minor patina. Needs a bit of sharpening, G+ ......... $55.00
   Picture
   Picture - Back

5. TYRON'S, 8 INCH DRAW KNIFE, with FOLDING HANDLES, Laminated blade. Some minor patina ................... Sold $110.00
   Picture

6. JAMES SWAN, 8 INCH DRAW KNIFE. Folding handles. Laminated blade. One of the handles has owner's names and a phone number scratched into it. A collector's tag said it was patented in 1888. Could use a bit of sharpening and lapping, G++ .......... Sold $85.00
   Picture

7. DUNLAP 8 INCH DRAW KNIFE. Nice ebonized handles. Very nice. Could use a bit of sharpening, G++ .................... Sold $45.00
   Picture

8. MILLERS FALLS, 10-INCH SHINGLE DRAW KNIFE, The blade is not curved front to back, but has a belly for fine paring. Stained hardwood handles. Has some light patina, G+ ................. $55.00
   Picture

9. RUSSELL BROTHERS, NEW YORK, 10-INCH DRAW KNIFE, Very nicely-made earlier one with a laminated blade. The handles have a bit of additional finish, G++ ........... Sold $45.00
   Picture

10. GREENLEE DRAW KNIFE, 10 inch. With folding handles. Laminated blade. Crisp with a bit of minor rust and patina, Fine .................... Sold $85.00
    Picture
    Picture - Back

11. PEXTO 10 - INCH DRAW KNIFE, with folding handles. Minor patina. One handle has a gouge from hitting the blade, G+ ................. $50.00
    Picture
    Picture - Handle

12. LAKESIDE 12 - INCH DRAW KNIFE, Laminated blade. Missing some finish on the handles. Minor patina. Could use a bit of cleaning and sharpening, G+ ................. $65.00
    Picture
    Picture- Back

1. Boxed STANLEY NO. 750 BEVEL-EDGE FIRMER CHISEL SET OF SIX, In a display box box. 1/4, 1/2, 3/4, 1, 1 1/4 and 1 1/2- inch. Lengths around 9 1/4- to 9 3/4- inches. Marked Stanley on the blades and Made in USA on the sockets, These are in very crisp condition and have had little use. The handles are very nice. They could use a bit of sharpening and lapping, Fine Sold $450.00
   Picture
   Picture - Box
   Picture - Display

2. STANLEY NO. 60 BUTT CHISEL SET, Thin Blade. Set of four earliest butt chisels with the yellow Stanloid handles. They have the metal caps on the handles. Marked on the shank Stanley, No. 60 and made in USA. These are high-quality chisels. When these came out, they were more expensive than the Everlasting chisels. 1/4, 1/2, 3/4, and 1 inch. In the original plastic Tool Box of the World roll. Very good user tools. Close to new with some light pitting on the back that needs a bit of sharpening and lapping, G++ ....... Sold $60.00
   Picture
   Picture - Backs

3. STANLEY NO. 60 BUTT CHISEL SET, Thin Blade. Set of four earlier butt chisels with the yellow Stanloid handles. They have the metal caps on the handles. Marked on the shank Stanley, No. 60 and made in USA. These are high-quality chisels. 1/4, 1/2, 3/4, and 1-inch wide. Very good user tools. Very nice condition with some light patina. They could use a bit of sharpening and lapping, G++ ....... Sold $50.00
   Picture

4. STANLEY NO. R40 BEVEL-EDGE POCKET CHISEL, 1/4 inch. An early one from the 1930's. Black composition everlasting handles with the metal caps on the top, and orange Stanley logo. A high-quality chisel in nice original condition with some minor wear and patina. 3 3/4 inch blade, overall length is 8 1/2 inches. Could use a bit of sharpening, Fine ....... Sold $45.00
   Picture

5. STANLEY NO. 40 BEVEL-EDGE POCKET CHISEL, 1 1/2 inch. Black composition everlasting-type handle with the metal cap on the top that goes clear through to the blade. A high-quality chisel.Could use a bit of sharpening, Fine ....... Sold $35 .00
   Picture
   Picture - Back

6. STANLEY EVERLASTING NO. 40, 1/4 inch Pocket Chisel. Stanley with a Sweetheart logo, Made in USA and a patent number stamped on the socket. The blade is 4 inches and the chisel is 9 inches overall. Has been sharpened in a Vee shape. You can grind that out, G++ ....... Sold $40.00
   Picture

7. STANLEY EVERLASTING NO. 40, 3/4 inch Pocket Chisel. Marked Stanley and Made in USA. The blade is 3 inches and the chisel is 8 inches overall. Some patina on the bare-metal surfaces. It can use some sharpening, G++....... Sold $40.00
   Picture

8. STANLEY NO. 60, BUTT CHISEL. 2 inch. Black and yellow handle. 2 1/4 blade and 8 1/4 overall length.Has some wear to the rear of the handle and some light pitting on the blade which needs some sharpening, G+ ....... Sold $35.00
   Picture
   Picture - Back

9. STANLEY NO. 720, 1/4 inch bevel edge firmer chisel. Stanley, No. 720, and Made in USA mark on the socket. 6 inch blade, 12 inches overall. The handle is crisp with wear to the finish. Minor patina on the blade. Could use some sharpening, G+ ....... Sold $60.00
   Picture

10. STANLEY NO. 720, 3/8 inch bevel edge firmer chisel. New-old-stock. Stanley, No. 720 and Made in USA mark on the socket. 6 blade, 12 1/2 inches overall, Fine+ ....... Sold $80.00
    Picture

11. STANLEY NO. 720, 1/2 inch bevel edge firmer chisel. Stanley, No. 720, and Made in USA mark on the socket. 5 3/4-inch blade, 12 3/4-inches overall. Very crisp. The dark maroon handle has some chips to the finish, Fine ....... Sold $60.00
    Picture

12. STANLEY NO. 720, 3/4 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 12 1/4 inches overall. Nice handle with some wear to the finish. Has been cleaned. Needs a bit of sharpening and lapping, G+ ....... Sold $55.00
    Picture

13. STANLEY NO. 720, 3/4 inch bevel edge cabinet chisel. Stanley on the blade, and Made in USA mark on the socket. 4 1/4 inch blade 12 3/4 inches overall. Aside from being sharpened, it look like new, Fine+ ....... Sold $65.00
    Picture

14. STANLEY NO. 720, 1 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 3/4 inch blade, 13 inches overall. Very clean and crisp with some minor chipping to the finish on the handle,Fine ....... Sold $65.00
    Picture

15. STANLEY NO. 720, 2 inch bevel edge firmer chisel. This one has had very light use. Marked Stanley, and Made in USA on the socket. 5 3/4 inch blade, 13 3/4 inches overall. The handle has a bit of wear and a few chips to the finish, Fine ....... Sold $145.00
    Picture
    Picture

16. STANLEY NO. 720, 2 inch bevel edge firmer chisel. This one has had light use. Marked Stanley, No. 720, and Made in USA on the socket. 6 inch blade, 13 1/2 inches overall. The tip of the handle is mashed a bit, Fine ....... $110.00
    Picture

17. STANLEY NO. 750, 1/4 inch bevel edge butt chisel. 3 1/4 inch blade, 8 1/4 inches overall. Marked Stanley, No. 750 and Made in USA on the socket. Nearly new with a bit of patina, Fine ....... Sold $55.00
    Picture

18. STANLEY NO. 750, 3/8 inch bevel edge butt chisel. 9 1/4 inches overall. Marked Stanley and Made in USA on the socket. Some patina and a little light pitting needs some lapping, G+ ....... Sold $60.00
    Picture

19. STANLEY NO. 750, 1/2 inch bevel edge butt chisel. 9 inches overall. Marked Stanley, No. 750 and Made in USA on the socket The handle has some wear to the finish. Can use a, G+ ....... Sold $55.00
    Picture

20. STANLEY NO. 750, 1/2 inch bevel edge butt chisel. 3 inch blade, 8 inches overall. Marked STANLEY, No. 750 and Made in USA on the socket. The leather top on the handle is a bit mashed. Could use a bit of sharpening and lapping, G+ ....... Sold $45.00
    Picture

21. STANLEY NO. 750, 5/8 inch bevel edge butt chisel. Nearly new condition. Marked Stanley and Made in USA on the socket. 3 1/2 inch blade,9 1/2 inches overall, Fine + ....... Sold $110.00
    Picture

22. STANLEY NO. 750, 5/8 inch bevel edge butt chisel. Marked Stanley, and Made in USA on the socket. 3 3/8 blade, 9 1/4 inches overall. Has a very nice dark maroon handle with minor mashing from use. A bit of light pitting could use some lapping, G+ ....... Sold $70.00
    Picture

23. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. Marked Stanley on the blade and Made in USA on the socket. 9 inches overall. Nice handle. It could use some sharpening, G+ ....... Sold $55.00
    Picture

24. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. Marked Stanley, and Made in USA on the socket. 3 1/4 inch blade, 9 inches overall. The handle is missing some finish, some light stain on the blade. Could use some some sharpening, G+ ....... Sold $50.00
    Picture

25. STANLEY NO. 750, 7/8 inch bevel edge butt chisel. 3 1/4 blade, 9 1/4 inches overall. Marked Stanley, No. 750 and Made in USA on the socket. Shiny-nice with little use, Fine ....... Sold $110.00
    Picture

26. STANLEY NO. 750, 1 inch bevel edge butt chisel. 9 inches overall. Marked Stanley, No. 750 and Made in USA on the socket. The handle has some wear to the finish. Could use some some sharpening and lapping, G+ ....... Sold $50.00
    Picture

27. STANLEY NO. 750, 1 inch bevel edge butt chisel. 9 1/4 inches overall. Marked Stanley, No. 750 and Made in USA on the socket. The handle has a few minor scuffs. Could use a bit of lapping, G+ ....... Sold $55.00
    Picture

28. STANLEY NO. 750, 1 1/2 inch bevel edge butt chisel. 9 1/2 inches overall. Marked Stanley, No. 750 and Made in USA on the socket. Some minor patina. Very nice handle, G+ ....... Sold $80.00
    Picture

29. STANLEY NO. 750, 2 inch bevel edge butt chisel. This one has had very little use. Marked Stanley, No. 750, and Made in USA on the socket. 3 1/2 inch blade, 10 1/4 inches overall, Fine ....... Sold $145.00
    Picture

1. SET OF LAKESIDE BEVEL-EDGE SOCKET FIRMER CHISELS. It's a set of 12, 1/8, 1/4, 3/8, 1/2, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 3/4, and 2-inch,but the 5/8th is missing.
   These are good-quality chisels. The blades are nice with some very minor pitting and chipping on some of the edges. But the handles are not, and some are missing. Given the use on the handles, it shows the quality of the steel blades.
   So, they need handles. I decided to leave the remnants of the handles in case you would want to use some while making or coming up with handles. I would rate the blades, which is what I'm actually selling, G++ ................ Sold $190.00
   Picture
   Picture - Backs
2. OHIO TOOL CO. 3/4-inch CORNER CHISEL. 7 3/4 inch blade, 15 inches overall length. Very crisp with some minor patina. The handle has been mashed down, but still functional. It may like some sharpening and lapping, G+ ....... Sold $55.00
   Picture

3. T. H. WHITHERBY 7/8-inch CORNER CHISEL. 8 inch blade, 18 inches overall length. The handle is a replacement. It may like some sharpening and lapping, G+ ....... Sold $60.00
   Picture

4. KEEN KUTTER, 1/8 INCH SOCKET FIRMER CHISEL. 6 inch blade length, overall length is 12 1/2 inches, G++ ....... $35.00
   Picture

5. PEXTO, 1/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/4 inches. The tip of the handle is a bit mashed. Can use some sharpening, G+ ....... Sold $35.00
   Picture

6. BUCK BROS., 1/4 INCH CRANK-NECK CHISEL. Bevel edge. Blade is 6 inches. Can use some sharpening and lapping, G+ ....... $55.00
   Picture

7. KEEN KUTTER, 1/4 INCH SOCKET BUTT CHISEL. Blade is 3 1/2 inches, overall length is 9 1/2 inches. The handle looks like a replacement. Can use some sharpening, G+ .......$20.00
   Picture

8. DIAMOND EDGE, 3/8 INCH BEVEL-EDGE FIRMER CHISEL. Very nice condition. Blade is 6 inches, overall length with replacement handle is 11 3/4 inches. Needs a bit of sharpening and lapping, G++ ....... Sold $40.00
   Picture

9. JAMES SWAN, 1/2-INCH MILLWRIGHT'S SOCKET FIRMER CHISEL, Curved top. The blade is 8 inches, 15-inches overall length. The handle is missing the iron ring. Could use a bit of sharpening, G++ ....... $60.00
   Picture

10. UNION HARDWARE, 1/2 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. The blade is 8 inches, 14 3/4 inches overall length. Can use some sharpening, G+ ....... $45.00
    Picture

11. DOUGLASS MFG. CO., 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 5 1/2 inches, overall length is 13 1/2 inches. It could use a bit of sharpening and lapping, G+ ....... Sold $25.00
    Picture

12. FULTON TOOL CO., 1/2 INCH SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/4 inches. Can use some sharpening, G+ ....... Sold $25.00
    Picture

13. SAMSON, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches . Can use some sharpening, G+ ....... $25.00
    Picture

14. EVERKEEN, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches. Ebonized handle. Can use some sharpening and lapping, G+ ....... $30.00
    Picture

15. D. R. BARTON, 5/8 INCH BEVEL-EDGE FIRMER CHISEL. Blade length is 5 1/2 inches. There is some pitting, but not near the end. Needs some sharpening and lapping, G+ ....... Sold $50.00
    Picture

16. T. H. WHITHERBY, 3/4 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. A very high-quality American edge tool maker. Blade is 8 inches, overall length with new exotic hardwood handle is 18 1/4 inches. The blade has been cleaned, lapped and sharpened, G+ ....... Sold $65.00
    Picture

17. L & I. J. WHITE, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 12 3/4 inches. Some minor stain on the blade and a replaced handle, but a very nice chisel from a great maker. Can use some sharpening, G++ ....... Sold $45.00
    Picture

18. SAMSON, 7/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Made by Union Hardware Co. Blade is 6 inches, overall length is 13 inches . Chip on edge needs some sharpening, G+ ....... $45.00
    Picture

19. BUCK BROS, 1 INCH BEVEL-EDGE SOCKET FIRMER CHISEL, Blade is 5 1/2 inches, 12 1/2 inches overall. The handle is probably a replacement. Can use some sharpening and lapping, G+ ....... Sold $45.00
    Picture

20. UNION, 1 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 4 1/4 inches, overall length is 12 1/2 inches. Very crisp. Can use some sharpening, G+ ...... Sold 35.00
    Picture

21. JAMES SWAN, 1 1/4-INCH SOCKET FIRMER CHISEL, The blade is 5 3/4 inches, 13 3/4-inches overall length. The handle is probably a replacement. Could use a bit of sharpening, G+ ....... Sold $45.00
    Picture

22. BUCK BROS. CAST STEEL, 1 1/2 INCH TANGED BUTT CHISEL. Blade is 2 1/2 inches, overall length is 8 3/8 inches. Crisp. Some minor patina but very nice. Can use some sharpening, G++ ...... $35.00
    Picture

23. BUCK BROS. CAST STEEL, 1 3/4 INCH FRAMING CHISEL. Blade is 8 inches, overall length is 17 1/2 inches. Laminated blade is domed, not beveled along the top. Can use some sharpening and, G++ ....... $95.00
    Picture
    Picture - Back

24. HE MO JO, 2-INCH SOCKET FRAMING CHISEL. A Nebraska hardware Co. logo on this heavy-duty chisel. I don't know who made it, but it is good quality with a laminated blade. Includes a new handle that may need a bit of fitting besides just banging it in. Use the old stub as a template. Blade is 6 3/4 inches, 15 inches overall. Some patina and minor pitting. Can use some sharpening and lapping, but it is a great user, G+ ....... Sold $50.00.
    Picture

1. DOUGLASS MFG. CO. 1/2 INCH SOCKET MORTISE CHISEL, Blade is 7 inches, 15 1/2 inches overall length with a new exotic hardwood handle. Has been sharpened and lapped, G+ ....... Sold $55.00
   Picture

Gouges [Click To Order]

1. D. R. BARTON, 1/8 inch socket firmer gouge. Incannel. Extra-long. It is unmarked but came with the 1/4 listed below which has a partial Barton mark. 15 inches overall. Nicely turned fruitwood handle, G+ ....... Sold $45.00
   Picture

2. D. R. BARTON, 1/4 inch socket firmer gouge. Incannel. Extra-long. It has a partial mark. 14 1/2 inches overall. Nicely turned fruitwood handle, G+ ....... Sold $45.00
   Picture

3. ZENITH, 1/4 inch socket firmer gouge. 6 inch blade, 13 inches overall. Rose City Wood Carvers is written in the channel, G++ ....... $35.00
   Picture

4. UNION HARDWARE, 1/2 INCH SOCKET GOUGE, Medium sweep. 6 1/4 inch blade, 13 1/4 inches overall. Very crisp, Fine ....... Sold $45.00
   Picture

5. BUCK BROS, CAST STEEL, 1 INCH SOCKET FIRMER GOUGE, Incannel. 6 inch blade, 14 inches overall. Very crisp and shiny. Boxwood handle is very nice, Fine ....... Sold $45.00
   Picture

6. UNION HARDWARE CO., 1 INCH SOCKET PARING GOUGE, Incannel. 6 inch blade, 13 1/2 inches overall. Has had little use, Fine ....... $50.00
   Picture

7. D. R. BARTON, 1 3/4 TANGED GOUGE, Incannel gouge is very heavy-duty. 8 inch blade, 16 inches overall. Needs a bit of sharpening, G++ ....... Sold $65.00
   Picture

1. D. R. BARTON, POLLED CARPENTER'S ADZE, 5 1/2 inches wide. 33-inch handle needs a bit of fitting at the head. The head is crisp with some minor patina. Needs a bit sharpening and lapping. This is a great user, G++....... Sold $90.00
   Picture
   Picture of head
   Picture of bottom

2. COLLINS LEGITIMUS LIPPED CARPENTER'S ADZE, With poll. 4 1/2 inch wide blade. 34 inch old handle that is a replacement. Very nice condition. Needs a bit of sharpening and lapping, G+++ ....... Sold $110.00
   Picture
   Picture of head
   Picture of bottom

1. JAS SWAN CO, 3 INCH SLICK, This one is really, really nice. Like new. No Pitting. 9 inch blade, 27 inches overall. It needs a minor sharpening and lapping. You're going to love it, Fine+ .......... Sold $265.00
   Picture

2. P. S. & W. Co.,NO. 1 EX. 3 INCH SLICK, An early Peck, Stowe & Wilcox top-of-the-line slick.10 1/4-inch blade, 30 3/4-inches overall. It is in very crisp condition with a few spots of light pitting. It can use some sharpening, G+++ .......... Sold $215.00
   Picture
   Picture - Back

3. WINSTEAD EDGE TOOL WORKS - T.H. WHITHERBY 3 1/2-INCH SLICK. Marked with both logos. Very nice condition with a laminated blade. Some minor roughness needs a bit of sharpening and lapping. The handle is new, owner-made from a very hard tropical hardwood. Good offset at the socket to save your knuckles, G++ .......... Sold $195.00
   Picture
   Picture - bottom
   Picture - side

4. 2 1/2 INCH SLICK, A rare size. No maker's mark. Blade is 9 3/4 inches long. It's in crisp condition, but the top of the bevel has been roughly ground and there is some light etching on the bottom that needs a bit of lapping. The handle is a replacement, and it needs a bit of fitting, G+ .......... $110.00
   Picture

Addis Carving Tools [Click To Order]

1. S. J. ADDIS, NO. 2, 1/8 inch skew. Nice beech handle. Needs some sharpening, G+++ ........ Sold $25.00
   Picture

2. S. J. ADDIS & SONS, NO. 3, 3/8 inch shallow-sweep gouge. Nice beech handle. Needs some sharpening, Fine ........ Sold $35.00
   Picture

3. S. J. ADDIS & SONS, NO. 3, 1/2 inch shallow-sweep gouge. Nice beech handle. Needs some sharpening, Fine ........ Sold $35.00
   Picture

4. S. J.ADDIS, NO. 5, 1/4 inch shallow sweep gouge. Nice beech handle. Needs some sharpening and lapping, G++ ........Sold $35.00
   Picture

5. S. J.ADDIS, NO. 5, 3/8 inch shallow sweep gouge. Nice beech handle. Needs some sharpening, Fine ........ Sold $40.00
   Picture

6. S. J. ADDIS, NO. 5, 1 1/8 inch shallow-sweep gouge. Also marked Hmf_carving_set_b_box.jpg. S. & Co. Nice beech handle. Needs some sharpening, Fine ........ Sold $65.00
   Picture

7. S. J. ADDIS, NO. 8, 3/8 inch gouge. The beech handle has a check. Needs some sharpening, G+ ........ Sold $30.00
   Picture

8. J. B. ADDIS, NO. 11, 1/8 inch deep sweep gouge. No rust, small split in the handle, G++ ........Sold $32.00
   Picture

9. S. J.ADDIS, NO. 39, 1/4 inch parting tool. Wider than 90 degrees. Needs some sharpening, G++ ........ $50.00
   Picture

10. S. J. ADDIS, NO. 40, 1/2 inch bent parting tool. The blade has been sharpened both top and bottom. Needs some sharpening and lapping, G+ ........ Sold $30.00
    Picture

These are the older Buck Brothers carving tools that are high-quality carving tools. I would consider Buck Brothers to have been one of the premier edge-tool makers in the United States.

1. BUCK BROTHERS, No. 1, 7/8" straight chisel. 11 inches overall, Fine ..... $30.00
   Picture

2. BUCK BROTHERS, No. 4, 1/8" shallow sweep gouge, G++ ..... $32.00
   Picture

3. BUCK BROS, No. 4, 5/8" shallow sweep gouge. Missing the ferrule. Can use some sharpening, G+ ..... $30.00
   Picture

4. BUCK BROTHERS, No. 8 Gouge, 1/2 inch. 7 3/4 inches overall. Can use some sharpening, G+ ........ Sold $25.00
   Picture

5. BUCK BROTHERS, No. 11, 1/4" deep sweep gouge, G+ ..... $25.00
   Picture

6. BUCK BROTHERS,No. 11 Gouge, 7/16 inch. Looks like a file handle, Steel Fine ........ Sold $30.00
   Picture

7. BUCK BROTHERS, No. 17, 1/4" medium sweep bent gouge, G++ ..... Sold $34.00
   Picture

8. BUCK BROTHERS, No. 18, 5/8" deep sweep bent gouge, incannel edge. 9 1/2 inches overall, G+ ..... Sold $35.00
   Picture

9. BUCK BROTHERS, No. 40, 3/16" bent parting tool, G++ ..... Sold $35.00
   Picture

10. BUCK BROTHERS, No. 43, 1/4 inch spoon parting tool. Has a split in the handle, G+ ..... $35.00
    Picture

1. MILLERS FALLS CARVING TOOL SET, NO. 106C. A set of 6 carving tools with maple handles. 5/16 inch straight chisel, 3/8 inch bent straight chisel, 1/4 inch bent shallow-sweep gouge, 3/8 inch skew, 3/32 inch "U" tool, 3/32 inch veining tool, 6 inches long. May need some sharpening. It includes the cardboard outside box, and instructions, Fine ..... $65.00
   Picture
   Picture - Box

2. MILLERS FALLS CARVING TOOL SET, NO. 107. A set of 5 carving tools with maple handles. 3/8 inch bent straight chisel, 1/4 inch bent shallow-sweep gouge, 3/8 inch skew, 3/16 inch medium-sweep gouge, 1/8 inch parting tool. 5 inches long. With the pouch. Lightly used. May need some sharpening, Fine ..... $55.00
   Picture

3. MILLERS FALLS, 1/8 inch medium sweep gouge. Rosewood handle. Part of their longer set, G+ ..... $20.00
   Picture

4. KEEN KUTTER, No. 2, 9/32 inch skew, G++ ..... Sold $35.00
   Picture

5. H. TAYLOR, ENGLAND (with acorn) No. 2, 5/8 inch skew. Beech handle. Needs some sharpening, Fine ..... Sold $25.00
   Picture

6. SPEAR & JACKSON, 3/8" shallow sweep gouge, G+ ............ $15.00
   Picture

7. MOULSON BROTHERS, 1/2" shallow sweep gouge, G+ ............ $20.00
   Picture

8. UNMARKED, There is a 1 with a bit of an arrow? (It's tiny) No. 8?, 1/16 inch medium-sweep gouge. Thumbnail, G++ ..... $25.00
   Picture

9. SPEAR & JACKSON, No. 8, 1/4 inch gouge, thumb nailed. Fancy handle, G+ ............ $25.00
   Picture

10. H. TAYLOR, ENGLAND (with acorn) No. 8, 3/8 inch medium-sweep gouge. Beech handle. Needs some sharpening, Fine ..... Sold $25.00
    Picture

11. H. TAYLOR, ENGLAND (with acorn) No. 12, 1/4 inch shallow-sweep bent gouge. Beech handle. Needs some sharpening, Fine ..... Sold $35.00
    Picture

12. UNMARKED, No. 12, 1 inch shallow-sweep bent gouge. Very nice, Fine ..... Sold $45.00
    Picture

13. H. TAYLOR, ENGLAND (with acorn) No. 13, 7/8 inch shallow-sweep bent gouge. Beech handle. Needs some sharpening, Fine ..... Sold $40.00
    Picture

14. H. TAYLOR, ENGLAND (with acorn) No. 14, 1/2 inch shallow-sweep bent gouge. Beech handle. Thumbnail. Needs some sharpening, Fine ..... Sold $40.00
    Picture

15. H. TAYLOR, ENGLAND (with acorn) No. 19, 1/2 inch deep-sweep bent gouge. Beech handle. Thumbnail. Needs some sharpening, Fine ..... Sold $40.00
    Picture

16. H. TAYLOR, ENGLAND (with acorn) No. 19, 3/4 inch deep-sweep bent gouge. Beech handle. Needs some sharpening, Fine ..... Sold $40.00
    Picture

17. KEEN KUTTER, No. 20, 3/32 inch curved gouge, G++ ..... $30.00
    Picture

18. HERRING BROTHERS, London, No. 22, 1/4 inch front bent (spoon) chisel, right corner, Fine ..... $30.00
    Picture

19. H. TAYLOR, ENGLAND (with acorn) No. 24, 1/4 inch shallow-sweep spoon gouge. Beech handle. Needs some sharpening, Fine ..... $40.00
    Picture

20. UNMARKED, No. 26, 11/16 inch front bent gouge. Mahogany handle has a nick on the side to show sweep, G++ ..... Sold $35.00
    Picture

21. H. TAYLOR, No. 28, 1/4 inch front bent gouge. An earlier one with mahogany handle. Thumbnail edge, G++ ..... $40.00
    Picture

22. UNMARKED, No. 29, 1/8 inch front bent gouge. The tip has been modified to be a straight chisel. Mahogany handle, G++ ..... $30.00
    Picture

23. UNMARKED, No. 29, 5/8 inch front bent gouge. Mahogany handle, Fine ..... Sold $35.00
    Picture

24. D. R. BARTON, No. 30, 1/8 inch front bent gouge. Mahogany handle has a nick on the side to show sweep, G++ ..... Sold $35.00
    Picture

25. H TAYLOR, London, No. 39, 3/8 inch parting tool,G+ ..... $30.00
    Picture

26. D. R. BARTON, No. 40, 1/2 inch bent parting tool. Needs a bit of sharpening, G++ ..... Sold $40.00
    Picture

27. H. TAYLOR, ENGLAND (with acorn) No. 45, 1/4 inch parting tool. Beech handle. Needs some sharpening, Fine ..... $35.00
    Picture

28. H. TAYLOR, ENGLAND (with acorn) No. 67, 1/2 inch medium-sweep fishtail gouge. Beech handle. Needs some sharpening, Fine ..... Sold $40.00
    Picture

Back To Tool Index

Back to Homepage