JON ZIMMERS ANTIQUE TOOLS, Measuring Tools For Sale

MEASURING TOOLS FOR SALE This is a list of measuring tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

This section has Squares, Bevel Squares, Angle Dividers, Marking Gauges, Machinist Tools, Trammels, Rules and Tape Measures

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Back To Tool Index Back to Homepage

Squares [CLICK TO ORDER]

HENRY DISSTON & SONS, NO. 1, 4 inch Try Square - Early mark on the blade. Rosewood handle with brass face. Blued steel blade is graduated in 8ths. In very crisp original condition with a few minor scuffs and dings, Fine ........ Sold $65.00
Picture
HENRY DISSTON & SONS, NO. 1, 7 1/2 inch Try Square - Early mark on the blade. Rosewood handle with brass face. Blued steel blade is graduated in 8ths. In very crisp original condition with a few minor scuffs and dings, Fine ........ $65.00
Picture
STANDARD TOOL CO. TRY SQUARE. 3 3/4-inch blade overall length. A high-quality American maker who's products are rare. Graduated in 16ths and 32nds, G+ ........ $95.00
Picture
BROWN & SHARPE, Hardened Steel Square, 4-inch size. Not graduated. Has a few spots of rust and owner's mark, G++ ........ $40.00
Picture
L. S. STARRETT 12 INCH COMBO SQUARE. Crisp, 12-inch, hardened No. 4 rule graduated in 8ths, 16ths, 32nds and 64ths. Some dirt and a bit of patina, G++ ........ $60.00
Picture
L. S. STARRETT 12 INCH COMBO SQUARE. 4R 12 inch, hardened rule graduated in 8ths, 16ths, 32nds and 64ths. The scribe is missing. Some patina and dirt but legible, G+ ........ $45.00
Picture
L. S. STARRETT 18 INCH COMBO SQUARE with REVERSIBLE PROTRACTOR HEAD. Crisp, 4R graduated, 18 inch, hardened No. 4 rule graduated in 8ths, 16ths, 32nds and 64ths. Has combo square head with level, and reversible protractor head. The slot of the protractor is in the center along the length of the head, so, you can use it on either side, instead of having to reset the square to mark from the other side. The scribe is still there, G+ 95.00
Picture
Picture - Other Side
L. S. STARRETT NO. 490, REVERSIBLE PROTRACTOR HEAD WITH 18-INCH RULE, The slot of the protractor is in the center along the length of the head, so, you can use it on either side, instead of having to reset the square to mark from the other side. Rule No. 4 graduated. Some spots of patina won't effect use, Fine .... $65.00
Picture
L. S. STARRETT REVERSIBLE PROTRACTOR HEAD , The slot of the protractor is in the center along the length of the head, so, you can use it on either side, instead of having to reset the square to mark from the other side. It also fits B.& S. and other rules, G+ .... $45.00
Picture
Picture - Other Side
BROWN & SHARPE COMBO SQUARE. 6-inch, Graduated in 8ths, 16ths, 32nds and 64ths. Missing the scribe, G+ ........ $35.00
Picture
UNION TOOL CO. PROTRACTOR HEAD AND 12-INCH RULE Hardened w/ No. 4 graduations - 8ths, 16ths, 32nds and 64ths. The protractor's base is wide enough to be free-standing. Has an owner's name on it. The rule is shiny, there is a shadow in the picture, G++ ........ $40.00
Picture
STANLEY NO. 2, Try & Miter Square, 6-inch graduated blade. Early one with the S.R.&L. trademark. Has been cleaned and lacquered, G+ ........ $35.00
Picture
STANLEY NO. 2, Try Square, 3 inch size, The earlier model. Graduated in 8ths, G+ ........ $40.00
Picture
STANLEY NO. 12, Improved Try Square, 4-inch size. Graduated. Nickel plated, but dull, G+ ........ $25.00
Picture
STANLEY NO. 12TS, Try Square, 10 inch size. Looks unused. Notched-rectangle logo on the blade, which is graduated in 8ths. Iron handle. Blued blade, FINE+ ........ $60.00
Picture
STANLEY NO. 20, Try Square, 6 inch size, T trademark from around 1910 on the blade. Graduated in 8ths. Rosewood handle with brass trim, G+ ........ $25.00 ea.
Picture
STANLEY NO. 21, 12-inch COMBINATION SQUARE. Sweetheart logo and Pat. 4-23-(19)17 stamped on the blade. A nickel plated combination square with a slot in the blade for it to reverse without coming loose. Some loss of plating and patina, G+ ........ $35.00
Picture
DISSTON No. 5 1/2, 10 inch Try Square, Iron handle and blued blade with inches and metric graduations. New-old-stock, Fine ........ Sold $75.00
Picture
Framing Squares [CLICK TO ORDER]
1. STARRETT NO. 110 STAIR GAGE OR FENCE, A long bar that fits across a framing square. It has a 90 degree angle to make a wide face for use. This is the 18 inch model. These are no longer produced. Nickel plated angle-stock with two sliding spring-loaded clips to attach to a framing square. Used to mark stair stringers, rafters, or anytime you need to repeat a consistent angle. This size will do about a 6 by 11 inch inside angle, like for a stair tread, but will leave a much longer end on the other side for rafters, etc.
  Starrett is the only company I know that ever produced something like this. 96% of the nickel plating remains, with some tool-box scratches. Shown on a framing square that is not included, Fine ........... Sold $125.00
  Picture
2. THE STANDARD TAKE-DOWN FRAMING SQUARE. Beveled joint with a fixed circular locking screw has a flat side to release. Tapered blade. Marked with a 1917 copyright date. Has polygon (where to set your stair gauges for different-sided shapes), brace measure, rafter table and Essex board-measure scales, G+ .......... $85.00
  Picture
3. PEXTO TAKE-DOWN FRAMING SQUARE. Beveled joint with a fixed circular locking screw has a flat side to release. Tapered blade. Has brace measure, rafter table and another scale that I'm not familiar with. Some light pitting, but completely legible, G+ .......... $80.00
  Picture
4. TAKE-DOWN FRAMING SQUARE, Tapered blade, Has a T/D logo in a shield. Feb 27, 1906 patent date, and another that is faint. Beveled joint with two cam-screws to lock. Has rafter, brace measure, and octagon scales. Some light stain, but completely legible, G++ .......... $80.00
  Picture
5. P. S. & W. FRAMING SQUARE, Tapered ends. Octagon, brace and board measure scales. Missing a lot of its thin nickel plating, but crisp, G+ .......... $40.00
  Picture
6. STANLEY 12 INCH FRAMING SQUARE, NO. 12.. Graduated in 1/8ths and 1/16ths inches. The graduations are legible, G+ .......... $20.00
  Picture
7. S & CO.NO. 141, 6 INCH FRAMING SQUARE. I'm not sure who the mfr. is. Graduated in 8ths and 16ths. 80% of the nickel plating remains, G+ ........ $15.00
  Picture
Bevel Squares [CLICK TO ORDER]
1. BROWN & SHARPE NO. 495, UNIVERSAL BEVEL PROTRACTOR. Well adapted for all classes of work where angles are to be laid. One side is flat so it can be laid flat upon the paper or work. A small thumb pinion will fit on the back to get an extremely fine adjustment. After setting the dial it is clamped by the large thumb nut on the front. The protractor has an owner's name.
  Comes in a leather-covered case. Fine ......... $75.00
  Picture
  Picture - Back
2. STARRETT NO. 47 IMPROVED BEVEL - 3 1/2-inch body and a 6-inch blade that is slotted with an offset at one end to set up for more functions than an ordinary bevel square,Fine ........... $45.00
  Picture
3. UNIVERSAL BEVEL - 3-inches long. Not marked by Mfr. Has an offset bend to the blade to allow setting to very narrow angles, G+ ........... $35.00
  Picture
4. STANLEY NO. 1 TRY AND MITER SQUARE. Four inch length. This is the Winterbottom's Patent. Type I with the iron frame handle and black walnut inlay. Has the 1869 and 1874 patent dates stamped in the wood, and the lead fill around the three rivets.
  Some stain but no pitting on this early square in the smallest size. I think it is nicer than the picture shows, G++ ............ Sold $50.00
  Picture
5. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 6 inch. STANLEY logo cast on one side and U.S. Pat. 7-14-08 on the other. Almost all of the nickel plating remains, Fine ........... Sold $65.00
  Picture
6. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 8 inch. STANLEY logo cast in body,Pat'd. 7-14-(19)08 on the other side. Has some rust and patina, G+ ........... $35.00
  Picture
7. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 10 inch. STANLEY logo cast in body,Pat'd. 7-14-08 on the other side. almost all of the nickel plating remains, Fine ........... $55.00
  Picture
8. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 10 inch, STANLEY logo cast in body. Most of the nickel plating remains, with minor tarnish, G++ ........... Sold $40.00
  Picture
9. STANLEY NO. 25, 6 inch Sliding T bevel. Rosewood handle. Notched-rectangle logo on the blued blade that has a few spots of wear and rust. STANLEY in gold on the rosewood body, G+ ........... $25.00
  Picture
10. DISSTON & MORSS, 6 inch Sliding T bevel. An uncommon bevel square with the distinctive thumbscrew. Has some patina and dirt, G+........... $25.00
  Picture
11. STANLEY NO. 25, 8 inch Sliding T bevel. Rosewood handle. Notched-rectangle logo on the blued blade. STANLEY in gold on the rosewood body, with minor wear to the finish, Fine ........... Sold $25.00
  Picture
12. STANLEY NO. 25, 10 inch Sliding T bevel. Notched-rectangle logo on the blade. Rosewood and brass. Crisp, Fine ........... $45.00
  Picture
13. STANLEY NO. 25, 12 inch Sliding T bevel, Marked STANLEY and PAT'D 9-6-(19)04 on the blade. Rosewood handle with brass trim. Some minor roughness on the blade, G+ ........... Sold $45.00
  Picture
14. STANLEY NO. 25, 12 inch Sliding T bevel, Sweetheart logo on the blade. Rosewood handle with brass trim. Has some patina, G+ ........... Sold $40.00
  Picture
15. ZENITH 6 inch bevel, made by DISSTON. Similar to the Stanley No. 25, G+................. Sold $20.00
  Picture
16. STANLEY DEFIANCE, Sliding T bevel, Blued steel. Virtually all of the original finish remains, Fine ........... Sold $20.00
  Picture
Angle Dividers [CLICK TO ORDER]
1. STANLEY NO. 30 ANGLE DIVIDER, Used to divide or bisect an angle where two boards need to be cut to fit, or layout 4, 5, 6,8 and 10 sided figures. Has basically all of the nickel plating, Fine ..... $110.00
  Picture
2. STANLEY NO. 30 ANGLE DIVIDER, Used to divide or bisect an angle where two boards need to be cut to fit, or layout 4, 5, 6,8 and 10 sided figures. The nickel plating has some wear and patina, but completely functional, G+ ..... $75.00
  Picture
3. STANLEY NO. 31 ANGLE DIVIDER, the early model with a rosewood body. This model didn't have the cross-bar at the bottom, it is complete. Script logo and patent date on the blade, G+..... $120.00
  Picture
Marking Gauges [CLICK TO ORDER]
1. GOODELL PRATT CO. CENTER MARKING GAUGE. Has Pat. July. 3. (19)06 date stamped on it. Used to mark the center of stock up to two-inches wide. Very rare, G+ ............ $85.00
  Picture
  Picture
2. NESTOR'S PATENT CLAPBOARD GAUGE. This over-the-top showy brass and mahogany? gauge was patented on Dec 31, 1867, by John Nester, of Portland, Oregon. Its features include a clapboard marker, to mark the ends of siding to the proper length; a marking gauge; a level; and a 12 inch rule.
  Quite an historically and artistically spectacular early tool for the work it was designed to do. It has some minor tool-box dings, but is still fully functional. Has been lightly cleaned, G++ ............ $215.00
  Picture
  Picture
3. REEVE'S PATENT BUTT GAUGE, A small patented butt gauge with three arms, from the late 1800s, G+ .............. $45.00
  Picture
4. ROSEWOOD MORTISE GAUGE, This one is made from rosewood with brass trim. Although it is unmarked, the bulls-eye trim decoration was used by the Chapin Stephens firm. It is in overall very crisp condition with some scuffs along the top of the stem from tightening the fastening screw. Has two brass bars on the face and a brass wear plate on the stem, G+ .............. $50.00
  Picture
5. SANDUSKY BEECH SLITTING GAUGE, Unmarked by manufacturer, but was made by Sandusky. It can be used as a marking gauge. Has a handle like one on a plane. Beam will work to 18 inches. It's pretty crisp, and has had light use, but it's dusty, G++ ............ $75.00
  Picture
6. STANLEY NO. 61, MARKING GAUGE, Beech with beech thumbscrew. Square head. Sweetheart logo on the stem. It was never used, but there is a bit of stain from storage, Fine ............ Sold $15.00
  Picture
7. STANLEY NO. 161, MARKING GAUGE, Earliest beech gauge that has the mustache plate on one side and the 1886 patent cast brass attachment on the head to mark curved surfaces, G+ ............ Sold $40.00
  Picture
8. STANLEY NO. 65, MARKING GAUGE, Early style.Boxwood. Square head with brass thumbscrew. Sweetheart logo on the stem, G+ ............ $20.00
  Picture
9. STANLEY NO. 65, MARKING GAUGE, This is the later model; boxwood with the triangular head and stem. You can angle the point and drag it to prevent tear-out. Very crisp, Fine ............ $45.00
  Picture
10. STANLEY NO. 65, MARKING GAUGE, This is the later model; boxwood with the triangular head and stem. Notched rectangle logo and marked Patent Pending, G++ ............ $40.00
  Picture
11. STANLEY NO. 165, MARKING GAUGE, Boxwood. Square head with brass thumbscrew. It is not marked, but by Stanley. The moustach wear plate is on one side of the head. The other side has the patented-in-1886 face plate with a bump on each side for convex or concave marking. That is what gives it the No. 165 designation, G+ ............ Sold $30.00
  Picture
12. STANLEY NO. 72, MARKING AND MORTISE GAUGE, Beech with brass thumbscrews. Sweetheart logo on the stems. This one has had very little use. It is crisp and ready to go to work, G++ ............ $45.00
  Picture
  Picture
13. STANLEY NO. 73, MORTISE GAUGE, Boxwood. Square head with brass thumbscrew, A little shorter than the other numbers at 6 inches long. Graduations to three inches for the slide. A crisp example with a couple of dings on the back of the head, Fine .......... Sold $65.00
  Picture
  Picture
14. STANLEY NO. 77, MORTISE GAUGE, This one is marked on the bottom of the head. Rosewood and brass. One side of the stem is a marking gauge, the other is a mortise gauge with two points and a slide adjuster. Long points. It has the shoe for the tightening screw. It is quite crisp with some minor scuffing and scratches, G++ .......... Sold $70.00
  Picture
15. STANLEY NO. 77, MORTISE GAUGE, Has the Sweetheart logo on the back of the head. Rosewood and brass. One side is a marking gauge, the other is a mortise gauge. This is in very crisp condition with minor dings, and the points are long. It has the shoe for the tightening screw, Fine .......... Sold $85.00
  Picture
16. STANLEY NO. 85 1/2, PANEL GAUGE, Rosewood and brass. With a 20 inch length, it is useful for scribing panels and other wide boards. This one is marked only with the Stanley Aug. 5, 1873 patent date on the stem. It is complete and still in very crisp condition, Fine .......... Sold $110.00
  Picture
17. In the Box STANLEY NO. 90G MARKING GAUGE, One adjustable arm with graduations. Most of the nickel plating remains, Fine ............ Sold $40.00
  Picture
18. In the Box STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. Most of the nickel plating remains, Fine, Fine ............ Sold $40.00
  Picture
19. STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. 85% nickel plating remains. Good point, G++ ............ $25.00
  Picture
20. STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. The nickel plating is dull. Good point, G+ ............ $20.00
  Picture
21. In the Box STANLEY NO. 91 MARKING & MORTICE GAUGE, Notched-rectangle logo. Two graduated adjustable arms with points. All of the nickel plating remains,like new. The box has minor damage, Fine+ ............ $65.00
  Picture
22. STANLEY NO. 91 MARKING & MORTISE GAUGE, Two graduated adjustable arms with points. Some of the japanned finish is missing, probably WWII., G+ ............ $30.00
  Picture
23. STANLEY NO. 91 MARKING & MORTICE GAUGE, Sweetheart logo on the thumbscrew. Two graduated adjustable arms with points. Most of the nickel plating remains, Fine ............ Sold $35.00
  Picture
24. E. C. STEARNS MORTICE GAUGE. Like the Leavett Patent. All steel with two arms. The long one is graduated. Roller cutters won't follow the grain. These are very high quality. 80% nickel plating remains, G+ ............. $45.00
  Picture
25. STANLEY NO. 92 BUTT and RABBET GAUGE, Sweetheart logo on the head. Used for laying out door hinges and strikes. It's also useful as a marking and mortise gauge. Complete with the steel scribe on the side. Very crisp with minor wear, Fine ............ $80.00
  Picture
  Picture - Bottom
26. STANLEY NO. 92 BUTT and RABBET GAUGE, 1892 patent date on the head. Used for laying out door hinges and strikes. It's also useful as a marking and mortise gauge. Complete with the steel scribe on the side. Has a re-glued split on the back between the brass plate and the bottom. otherwise very crisp with minor wear, Fine ............ $50.00
  Picture
27. STANLEY NO. 93 BUTT and RABBET GAUGE, V logo on the thumbscrew dates this one to around 1910. Used for laying out door hinges and strikes. It's also useful as a marking and mortise gauge. Virtually all of the nickel plating remains, Fine ............ $50.00
  Picture
28. In the Box STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. 99% of the nickel plating remains. In the orginal box, which has some damage., Fine ............ $25.00
  Picture
29. STANLEY NO. 95 BUTT GAUGE, An earlier (1900) and smaller one. Used for laying out door hinges. It's also useful as a marking gauge. 90% of the nickel plating remains. I will include a copy of the instructions, G++ ............ Sold $25.00
  Picture
30. STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. WW II vintage with 99% of the japanning remaining, Fine ............ $25.00
  Picture
31. STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. Almost all of the nickel plating remains. I will include a copy of the instructions, Fine ............ Sold $20.00
  Picture
32. In the Box STANLEY NO. 97, MARKING GAUGE Earlier script logo. One side of the arm has the usual point, the other, the round wheel for marking difficult grain. The box has some damage, G+ ........ $45.00
  Picture
33. In the Box STANLEY NO. 98, MARKING AND MORTISE GAUGE One side of the arms have the usual points, the other, the round wheels for marking difficult grain. The arms set individually for a marking gauge, or to use for a mortise gauge. All of the nickel plating remains,like new. The box has minor damage, Fine+ ........ Sold $95.00
  Picture
34. STANLEY NO. 98, MARKING AND MORTISE GAUGE One side of the arms have the usual points, the other, the round wheels for marking difficult grain. The arms set individually for a marking gauge, or to use for a mortise gauge. Some tarnish and loss to the nickel plating, G+ ........ Sold $45.00
  Picture
35. THREE-ARM ROLLER GAUGE. The only maker I know of is Goodell Pratt. This one is a little different than my catalog. They may have changed over the years. Three arms with roller gauges, the two long ones can be reversed for points. 85% nickel plating with some minor patina, G+........ $75.00
  Picture
36. STEEL ROLLER GAUGE. Unmarked by MFR, but I have seen a couple of these before, with red paint inside of the head. The marking wheel is notched, G+........ $35.00
  Picture
Caliper Squares [CLICK TO ORDER]
1. BROWN & SHARPE, NO. 383 POCKET SLIDE CALIPER, Three-inch length. An earlier one. The slide is graduated to 64ths. 32nd graduations on the edge, G++ .......... $40.00
  Picture
Machinist's Tools [CLICK TO ORDER]

CLICK HERE FOR A LIST OF LEGS CALIPERS FOR SALE
1. STODDARD PATENT DIVIDERS, Bronze body with caliper points. Very crisp. Ten-inch length, G++ .................. $100.00
  Picture
2. J. STEVENS ARMS & TOOL CO. IDEAL SURFACE GAUGE. Patented Sept. 23, 1884 stamped on the side. 12-inch. Very crisp with minor patina, Fine .................. $175.00
  Picture
3. EARLY DIVIDERS AND CALIPER SQUARE PAIR, Probably early 19th-century. Very well-made and in very nice condition, Fine .......... $75.00
  Picture
4. STARRETT NO. 280 STANDARD MUSIC WIRE GAUGE. 1 1/2 inches in diameter, G++.................. $25.00
  Picture
5. STARRETT MACHINIST'S CAP. Looks like from the 1930s. Cotton top, Oilcloth on cardboard brim. " Campbell's" on back side. Size 7 1/4. Hasn't been used, Fine .......... Sold $35.00
  Picture
6. SARGENT & CO. WING DIVIDERS, 12 inch. Very crisp and nice with a couple of spots of rust, great user, G++ ........... Sold $50.00
  Picture
7. WING DIVIDERS. 16-inch-long dividers made with attention to delicate details. Marked J. Kirk, who was probably the owner/craftsman who made them, Fine .......... $80.00
  Picture
8. A. MATHESSON & SON DIVIDERS, 6-inch length. Early and very nice, G+ ........... $50.00
  Picture
9. EARLY 13-INCH DIVIDERS. Heavy old pair. Has some pitting, but still functional, G ........................ Sold $55.00
  Picture
10. SCHOLLHORN 9 1/2-INCH DIVIDERS. A rare dividers with a very graphic design. The early model with the Jan. 9, 1868 patent date. Has the fine-adjustment for the leg. The number 58 stamped on the parts because they were hand-fitted at that time, G+ ........................ $75.00
  Picture
11. L. S. STARRETT. NO. 272A FILLET OR RADIUS GAGE, 1/32 to 17/64, by 64ths. In their box, Fine ....... Sold $15.00
  Picture
12. INSIDE/OUTSIDE REGISTERING CALIPER. Six inches overall. Tight-joint. Graduated from 0 to 3 1/2 inches by 8ths. Not marked by Mfr, Fine ....... $50.00
  Picture
13. E & T INSIDE/OUTSIDE CALIPER. 5 1/2-inches overall. gauges to 2 1/2-inches, G+ ....... $35.00
  Picture
14. REGISTERING CALIPER. Small size - three inches overall. Tight-joint. Graduated from 0 to 2 inches outside. Not marked by Mfr, but has owner's initials, G+ ....... $30.00
  Picture
15. J. STEVENS & CO. 4 INCH THREAD CALIPER, the company that made firearms and precision tools. Earlier logo. Marked Pat. Nov. 20, 1883, that's the Warfield patent, G+ ........ $30.00
  Picture
Trammel Points [CLICK TO ORDER]
1. L.S. STARRETT CO. NO. 51 EXTENSION BEAM TRAMMEL POINTS. Early nickel-plated brass big ones (nine-inch points) that clamp on a stick for use. Includes caliper points with a fine-adjustment. In very nice condition on an owner-made bar for display, Fine ....... $95.00
  Picture
2. BRONZE TRAMMEL POINTS. Craftsman-made. Five inches high. Nice patina, Fine ...... $80.00
  Picture
3. STANLEY NO. 1 TRAMMEL POINTS. The smallest-sized brass trammel with the later cross-hatch casting design. Minor patina from age. It has the pencil holder attachment, G++ ...... Sold $70.00
  Picture
4. STANLEY NO. 3 TRAMMEL POINTS. 5 inches tall. The large-sized brass trammel with the early floral design. Still has almost all of the original lacquer with some stain from age, G+ ...... $70.00
  Picture
5. STANLEY NO. 3 TRAMMEL POINTS. 5 inches tall. The large-sized brass trammel with the later cross-hatch design, G+ ...... Sold $50.00
  Picture
6. STANLEY NO. 2 TRAMMEL POINT. Sweetheart logo on the point. The medium-sized brass trammel with cross-hatch design. In brand-new, original condition. Use this one as a third point to draw an ellipse, Or, if you already have one, make a pair, Fine++...... Sold $25.00
  Picture
7. STANLEY NO. 4TP TRAMMEL POINTS. Later gray model in the box. Has a pencil-holding feature. About 3 1/2 inches long. Minor wear to the box, Fine ...... Sold $35.00
  Picture
8. STANLEY NO. 4 TRAMMEL POINTS. Early model, with nickel plating, which is mostly remaining. Has a provision to attach a pencil. About 3 1/2 inches long, Fine ...... $45.00
  Picture
9. STANLEY NO. 4 TRAMMEL POINTS. Later gray model. Has a screw slot to attach a pencil. About 3 1/2 inches long, Fine ...... Sold $30.00
  Picture
10. GOODELL PRATT NO. 134 BEAM TRAMMELS. A 16-inch beam.The points are ground eccentric for fine adjustment, G+ ...... $50.00
  Picture
11. L. S. STARRETT NO. 50, IMPROVED TRAMMEL POINTS. These are the early Cook's Patent trammels from the late 1800s. Nickel plated bronze. Most of the nickel plating remains, Fine ...... $70.00
  Picture
12. L.S. STARRETT CO. NO. 50-A TRAMMEL POINTS. Earlier heavy brass nickel-plated style just after the Cook patent ones. With fine adjustment. Owner's initial lightly scratched on them. With tool-box dings. Great users, G+ ...... $40.00
  Picture
13. L.S. STARRETT CO. NO. 50-B TRAMMEL POINTS. Earlier heavy brass nickel-plated style just after the Cook patent ones. Without fine adjustment. With tool-box dings. Great users, G+ ...... $35.00
  Picture
14. In the Box L.S. STARRETT CO. NO. 59-F TRAMMEL POINTS SET. Complete with long and short straight and curved points, and the set of spheres to center on a hole. Basically new with some wear to the box, Fine ...... $100.00
  Picture
15. L.S. STARRETT CO. NO. 59 TRAMMEL POINTS. With five-inch points. You can add a pencil. They are unmarked, they may be General, Fine ...... Sold $25.00
  Picture
16. STANLEY PENCIL HOLDER FOR TRAMMEL POINTS. Clips on to the point and a pencil, Fine...... Sold $15.00
  Picture
Rules and Tape Measures [CLICK TO ORDER]
1. LUFKIN NO. 626, 6 FOOT PLUMBER'S RULE, One side has 16ths graduations, the other has a 45 degree scale. Like new, Fine+ ................... $40.00
  Picture
  Picture - Other Side
2. LUFKIN NO. SR12 SNAP RULE. One-foot rulf that rolls up for storage Metric scale on the back, G+ ........... $15.00
  Picture
  Picture
3. MASTER RULE CO., NO. X-6, Six-foot zigzag with extension slide, Fine ........... $25.00
  Picture
4. THE C-S. CO., NO. 036 COMBINATION RULE. 1-foot, 2-fold, brass-bound inclinometer, level, bevel and try square. Made by Chapin Stephens before they were bought-out by Stanley. Very crisp condition. Some minor light pitting on the bevel from storage, Fine ........... $150.00
  Picture
5. LUFKIN FOLDING STEEL RULE. two-fold, two-foot. Graduated in 1/8ths on one side, circumference inches - in 1/8ths - on the other. Some stain and minor pitting, G+ ...... $35.00
  Picture
6. GENERAL HDW. MFG. CO. FOLDING STEEL RULE. three-fold, three-foot. Graduated in 1/8ths and 1/16ths, with two inches of 32nds. Stainless with raised etch. The top leg is a bit faded, Fine ...... $30.00
  Picture
7. L. S. STARRETT. NO. 300 SEMI-FLEX RULE,Twelve inch rule is one inch wide. Graduated in 16ths, 8ths, 32nds, and 64ths (No. 4 graduations).New-old-stock. I have a few if you want more than one, Fine ++ ....... $15.00
  Picture
8. D. B. & S. (Darling, Brown & Sharpe) RULE 24 by 2 inches. An early American machinist's rule with a great owner-made wooden sleeve. No. 4 graduations (8ths, 16ths, 32nds and 64ths).
  There is some patina and a few spots of rust, but 99% of the graduations are legible, G+ ........... Sold $60.00
  Picture
9. RULE HOOK. Unmarked except for Made in USA. Nickel plated brass. Holds the end of long tapes to get tension for more accurate measurement, Fine ........... $25.00
  Picture
10. STANLEY, NO. 36 1/2 R, CALIPER RULE, One-foot,two-fold boxwood rule with brass trim. Notched-rectangle logo. 16ths on caliper. Graduated in 8ths, 10ths, 12ths and 16ths scales. Very crisp, Fine ........... $35.00
  Picture
  Picture - Other Side
11. STANLEY, NO. 54 RULE. Type 2 with the S. R. & L. trademark inside - before 1902. Two-foot, four-fold, arch-joint, brass_bound rule. Crisp condition that was lightly cleaned at some time, Fine ........... Sold $55.00
  Picture
12. STANLEY, NO. 62, FOLDING RULE, Two-foot, four-fold. Fully brass-bound boxwood rule. Sweetheart logo. Crisp and very nice with some minor patina on the brass, Fine ........... Sold $50.00
  Picture
13. STANLEY, NO. 62 1/2, FOLDING RULE, Two-foot, four-fold. Fully brass-bound boxwood rule. Type 2 with the S. R. & L. trademark inside - before 1902. Crisp and very nice with some very slight warping, Fine ........... Sold $50.00
  Picture
14. STANLEY, NO. 63, FOLDING RULE, Two-foot, two fold. Type 2 Stanley Rule & Level Co., pre-1902. Architect's scales inside. Crisp but missing a pin, Fine ........... $50.00
  Picture
15. STANLEY, NO. 63, FOLDING RULE, Two-foot, two fold. Sweetheart logo. Architect's scales inside. Crisp with very minor warping, Fine ........... $40.00
  Picture
16. STANLEY, NO. 66 1/2, FOLDING RULE, three-foot, four-fold. Boxwood. Sweetheart logo. New-old-stock. Very crisp, Fine ........... Sold $20.00
  Picture
17. STANLEY, NO. 84, FOLDING RULE, Two-foot, four-fold. Half-bound boxwood rule with drafting scales. S. R> & L. logo on the inside and STANLEY logo on the outside dates it between 1879 and 1921. Graduated in 8ths and 16ths, which puts it in the early side of those dates. Missing two pins. Very crisp, Fine ........... $65.00
  Picture
18. STANLEY, NO. 136 1/2, CALIPER RULE, 6 inch boxwood rule with brass caliper. Made in USA mark, G+ ........... $15.00
  Picture
19. STANLEY NO.167 BRICK MASON'S ZIG ZAG RULE, 6 foot zig zag rule. Graduated in 16ths on one side, and the other has scales to gauge the height of courses of bricks to ensure uniform mortar thickness, G++ ................... Sold $20.00
  Picture
20. STANLEY NO.906 ZIG ZAG RULE, This brand-new 6 foot zig zag rule, which was manufactured in the 1930's has English graduations, which means it's graduated left to right. These came from a cache of unused military surplus from WW II, yellow paint, New ................... $45.00
  Picture
21. LUFKIN, NO. X46F, Zig Zag Extension Rule, 6 foot, With brass extension slide for inside work. Some minor dirt and wear, Fine ................... $40.00
  Picture
22. THE LUFKIN RULE CO., 460 CM60CM ZIG ZAG RULE, Metric, 2 meter length, G++ ................... $35.00
  Picture
23. THE LUFKIN RULE CO., NO. 1206, Saginaw, Mich. Aluminum 6 foot Zig Zag, G++ ................... $25.00
  Picture
24. KEUFFELL & ESSER CO., 100 FOOT "STEVENS ALBADURE" STEEL TAPE, Graduated in 8ths and feet. The leather case has some minor wear and owner's name on the reel handle, and minor stain on the blade, G+ ........... $30.00
  Picture
25. LUFKIN RULE CO., 100 FOOT "LEADER" STEEL TAPE, Chrome-clad. Graduated in 8ths and feet. The leather case has some wear, G+ ........... $25.00
  Picture
26. LUFKIN RULE CO., 100 FOOT "BANNER" STEEL TAPE, White clad. Graduated in 8ths, G++ .......... Sold $30.00
  Picture
27. LUFKIN RULE CO., 50 FOOT "BANNER" STEEL TAPE, Ni-clad. Graduated in 8ths, G++ .......... $20.00
  Picture
28. LUFKIN RULE CO., 50 FOOT "BANNER" STEEL TAPE, White clad. Graduated in 8ths, G++ .......... $25.00
  Picture
29. LUFKIN RULE CO., 50 FOOT "UNIVERSAL" STEEL TAPE, An earlier one with an etched and blued blade, G+ .......... $20.00
  Picture
30. LUFKIN RULE CO., "MILL MENS" STEEL TAPE, 300 continuous inches (25 feet). No foot markings, just inches. Chrome clad, G++ .......... $45.00
  Picture
31. LUFKIN NO. C310, 25 FOOT "ANCHOR" STEEL TAPE, Chrome-clad, leather cover. In the original box with instructions, Fine ...........$40.00
  Picture
32. LUFKIN IMPROVED METALLIC TAPE. 50 FOOT CLOTH TAPE with steel threads. Leather case, 4 1/4 inches in diameter. Graduated in 1/2 inches, G+ ........... $30.00
  Picture
33. LUFKIN EXECUTIVE DIAMETER WHITE CLAD TAPE RULE, 6 foot tape that measures diameter to 64ths of an inch, in the original box, Like new ............ $25.00
  Picture
34. STANLEY DEFIANCE NO. 1261 TAPE RULE, 6 foot tape measure, Fine ............ $15.00
  Picture
Back To Tool Index Back to Homepage