This is a list of miscellaneous tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

This section has Doweling Machines, Miscellaneous Wood Working Tools, including Jointer Fences, Metal Working, Caulking Irons, Wheelwright and Sheet-metal Tools

Back To Tool Index Back to Homepage

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Wood Working Tools

No. 77 Doweling Machine and Cutters ... Click To Order

1. STANLEY NO.77, DOWELING MACHINE with SIX CUTTERS. In virtually new condition. With the original cardboard box and instructions Comes with six cutters - 1/4-, 5/16-, 3/8-, 1/2-, 5/8-, and 3/4-inch. Four in their original boxes.(The 3/8 cutter head came on the machine.) 99% of the blue enamel remains. Completely functional. Note: The threads on the front plate screw are left-handed - that's why the toggle-screw gets so banged up or destroyed - so, to take it off, turn it the other way than usual. The cardboard box has some damage, Fine+............. Sold $1695.00
   Picture
   Picture - Other Side

   Doweling Machine Parts Click To Order

2. Boxed 3/8-INCH CUTTER HEAD, New-old-stock. Black enamel. Very nice box with wrapper, Fine+ ............. Sold $110.00
   Picture

3. Boxed 5/16-INCH CUTTER HEAD, New-old-stock. Black enamel has a few dings. Very nice box with wrapper, Fine+ ............. Sold $145.00
   Picture

Other Woodworking Click To Order

1. Maco Patent Adjustable Template. A British-made template for transferring molding profiles or other complex edges for further work. Eight-inches long. Comes in its original fitted box. There is some dirt and minor wear, G+ ......... $85.00
   Picture
   Picture

2. STANLEY NO. 89 CLAPBOARD GAUGE PAIR. Used to hold clapboard siding in place for measurement and nailing. The gauge slips under the siding board below, and locks into place to hold the current board for measuring and nailing. 85% nickel plating. Move the handle sideways for a spur to lock them in place, G++ ........... Sold $75.00
   Picture

3. STANLEY NO. 89 CLAPBOARD GAUGE. Used to hold clapboard siding in place for measurement and nailing. The gauge slips under the siding board below, and locks into place to hold the current board. Move the handle sideways for a spur to lock them in place. Some nickel plating is missing, G+ ........... $45.00
   Picture
   Picture - Bottom

4. STANLEY NO. 88 CLAPBOARD MARKING GAUGE. Sweetheart logo and 9-7-(19)15 patent date stamped on the frame. Runs up against the corner boards to exactly mark the siding, Looks like it has never been used, Fine+ ........... $50.00
   Picture

5. STARRETT NO. 111 STAIR GAGE FIXTURES, They fit on any framing square and are used to layout stair stringers and rafter cuts. Most of the nickel plating remains with a bit of dirt, G++ ........... Sold $25.00
   Picture

6. STARRETT NO. 470 STAIR GAGE FIXTURES, Hexagonal buttons. They fit on any framing square and are used to layout stair stringers and rafter cuts. Most of the nickel plating remains, G++ ........... Sold $20.00
   Picture

7. L. & I. J. WHITE, TURNING GOUGE, 1 1/8 inch wide. 18 1/2-inches overall length. There's a short split in the handle, G++ ............. $35.00
   Picture

8. PEXTO SKEW LATHE CHISEL, 1 1/2 inch wide. 15-inches overall length. Some minor dings, but very nice condition, Fine ............. $40.00
   Picture

9. Boxed STANLEY NO. 185 BURNISHER, Use this one to turn the edge on scraper blades, among other uses. Looks brand new. In its original box, Fine+ ...... Sold $80.00
   Picture

10. GOODELL PRATT BURNISHER, Use this one to turn the edge on scraper blades, among other uses. Looks brand new with a bit of minor patina, Fine...... Sold $40.00
    Picture

11. TIMBER SCRIBE, Not marked by the Mfr. Beech handle with brass ferrule. Nice condition with some stain from age, G++ ............. $75.00
    Picture

12. STANLEY NO. 202, BENCH DOG, Pat'd 11-30=(19)09 cast in the body. Sides are about 3 1/2 inches long, G+ ............. Sold $30.00
    Picture

13. STANLEY NO. 203, BENCH BRACKET, Used to hold the other end of a long board to the edge of a work bench. To attach to a bench, the jaw or nose, is put through a hole in the bench. It seems to be made for a less-than 7/8 inch bench top. The screw clamp firmly holds the work in place, G+ ............. Sold $70.00
    Picture

14. STANLEY NO. 207, BENCH STOP, A tool that will immediately be useful to the carpenter, cabinetmaker or anyone interested in woodworking of any kind where a bench is necessary. It can be inserted in the top of a bench by boring a 9/16-inch hole. Its height is adjustable-a stiff spring holds it in position In it's original box, with some damage. Unused, but some oxidation to the finish, Fine ............. Sold $40.00
    Picture

15. MILLERS FALLS BENCH STOP. Fits into a two-inch round hole recessed into the bench. There is a screw to raise the stop, G+ .......... Sold 35.00
    Picture

16. BENCH STOP. Not marked by Mfr. Fits into the top of a bench and has a bolt with a thumbscrew underneath to adjust it. The top plate to be recessed is about 2 X 3 inches, G++.......... Sold 45.00
    Picture

17. STANLEY NO. 386, JOINTER FENCE, Has Pat 4-1-(19)13 cast in the frame. Sweetheart logo on the adjusting bar. Fits on the side of the No. 5 and longer bench planes to plane boards at an angle. Complete and entirely functional. Most of the nickel plating remains, but it is worn on the bottom of the fence. Some minor patina, G+ .......... Sold $140.00
    Picture
    Picture - Bottom

18. STEARNS JOINTER FENCE. Fits on the side of a plane to plane boards at an angle. Nine inches wide, Fine .......... $60.00
    Picture
    Picture

19. DIAMOND EDGE ADJUSTABLE JOINTER FENCE, Looks like it was made by Stearns. Fits on the side of a larger bench plane to gauge for an angle cut. 8 3/4 inch fence. 85% finishes with minor rust and dirt, G++ ........... Sold $45.00
    Picture
    Picture - Bottom

20. STANLEY NO. 28 CORNERING TOOL, Sweetheart logo ... Cuts 1/16 and 1/8 inch radius corners on the edge of a board. 95% of the nickel plating remains, Fine ........... Sold $25.00
    Picture

21. STANLEY NO. 29 CORNERING TOOL, Sweetheart. logo ... Cuts 1/4 and 3/8 inch radius corners on the edge of a board. The nickel plating is worn. Can probably use a touch-up sharpening, G+ ........... Sold $20.00
    Picture

22. BRIDGEPORT HARDWARE MFG. CO. NAIL PULLER. Very useful for pulling nails when working on an old house. 90% paint remains, Fine ........... Sold $35.00
    Picture

23. CHAMPION VISE, A cast iron vise that fits on a sawhorse (or bench). It has jaws on two sides to hold stock horizontally, or upright, like to hold a door for planing. The jaws are 4 1/2 inches long, G+ .... Sold $40.00
    Picture

24. NORTON HARD ARKANSAS ROUND EDGE SLIP STONE. Four inches long. New in the box, FINE+ ........... Sold $30.00
    Picture

1. SLATER'S TOOL SET. Slater's hammer, shingle-splitting anvil. and a zax, for removing shingles on a roof by going under them and pulling the nails, G+, ........... $120.00
   Picture

1. NORTH BROS. YANKEE NO. 250 RATCHET TAP WRENCH. The smaller one at 3 3/8 inches length, G+, ........... $25.00
   Picture

2. Boxed CARD NO. 51 TAP & DIE SET. This one has a set of collars - 4, 6. 8, 8, 10, 12 and 14, that attach to the large die stock to guide the work. The box is 6 by 9 inches.
   The 4-36 die and the 14-20 tap are missing. The other taps are mixed makers, G+ ........... $30.00
   Picture

3. BERG NO. 528, ESKULSTUNA, SWEDEN, Diagonal cutters. 4 1/2 inch length. For piano wire, G++ ........... Sold $20.00
   Picture

4. CRAFTSMAN, DRILL INDEX. For number drills, 4 1/2 inches long. No. 1 through 60. Cast metal, G++ ........... Sold $20.00
   Picture

5. MILLERS FALLS NO. 3 HAND VISE. 1 1/2-inch jaws. Box with a picture-label has some damage, G++ ........... $35.00
   Picture

6. HAND VISE, With wood handle. 1 1/4-inch jaws, G+ .... $40.00
   Picture

7. STANLEY No. 701 BENCH VISE, Sweetheart logo. 1 1/2 inch jaws, 5 1/2 inches long. Has some rust and light pitting, G ......... Sold $30.00
   Picture

8. STANLEY NO. 707 VISE, A practical auxiliary vise for holding small work. It has 1 5/8 inch jaws open to 2-inches.Some dings on the top of the jaws, G+ ........ Sold $30.00
   Picture

9. TOP & BOTTOM SWAGE, 3/4 INCH Beall Bros., Iron City. 5/8 inch tang, G+. ............. $50.00
   Picture

10. ACME, 5/8 inch Top fuller. Wire rope handle, G+ . ............. $45.00
    Picture

11. HELLER, 1/4-inch hot punch. Tape on handle, G+ ............. $50.00
    Picture

12. UNMARKED HAMMER, 2 1/2 lb. slender head is 7-inches long. Ends taper to 7/8-inches, G ............. $45.00
    Picture

13. PEXTO RAISING HAMMER, 2 lb. smaller one with 1 1/4- and 1 1/2-inch curved faces. Small ding near the edge of the big face, G ............. Sold $50.00
    Picture

14. UNMARKED TOP FULLER OR FORMER, Looks like a flatter but with a gently curved bottom that's 2 1/2-inches wide, G ............. $60.00
    Picture
    Picture - End

Wheelwright and Sheet-metal Tools
Click To Order

1. BENCH SHEARS. Not marked by Mfr. 30 inch length. 7 inch jaws. Fits in the hardy-hole on your anvil or in a bench plate. Crisp. Missing some of the enamel, but, Fine ........... Sold $65.00
   Picture

2. BUNG REAMER, Unmarked by Mfr, but stamped 2 1/2, which is the diameter it cuts. Very nice condition, G++ .... $80.00
   Picture

3. WILEY & RUSSELL MFG. CO.TRAVELLER, The Green River Tire Wheel - about 7 inch diameter. With a pointer, G+ .... $80.00
   Picture

4. TRAVELLER, Hand forged. About 7-inch diameter. There is a split in the handle, but it's still tight , G+ .... $35.00
   Picture

5. DOUBLE CALIPER, This one appears to be manufactured, but no mark. It is unusual because each side has an arm and thumbscrew it hold it in place. 22 inches overall. Crisp with some minor patina, Fine .... Sold $100.00
   Picture

Leather working Tools
Click To Order

1. C. E. OSBORNE & CO. ROUND KNIFE. 5 1/4 inch diameter blade. Rosewood handle with brass ferrule. This is the Osborne mark from before 1905, G++ .... $85.00
   Picture

1. T. LAUGHLIN, PORTLAND, ME. CAULKING IRON, 2 3/8 inches wide, very thin blade, G+ ....... Sold $40.00
   Picture

2. C. DREW & CO. CAST STEEL CAULKING IRON, 2 1/2 inches wide. One crease? (about 1/8 inch), G++ ....... Sold $40.00
   Picture

3. CAULKING IRON, Unmarked by mfr. Three crease (1/4 inch). 1 3/4 inches wide. One of the side ridges is damaged at the end 3/16 inch by pitting, G ....... $35.00
   Picture

Back To Tool Index Back to Homepage